Quick seller guide

This manual describes how to launch automated TRON energy sales using the EnergyFather service.

Setup takes 10-15 minutes and includes installing the TronLink wallet, staking TRX, connecting the address to the platform, and allocating resources to bandwidth and energy.

The guide also covers setting up an automatic reinvestment cycle (auto-staking, reward collection, and voting) to enable compound interest.

Minimum amount of TRX: approximately 8,000 TRX (to generate the minimum purchase lot of 65,000 energy).

Security: the service is granted limited technical rights to manage resources; access to withdraw or transfer your funds is NOT provided.

Table of contents

Why selling energy through EnergyFather is safe

The main security principle when using EnergyFather is that the service has no access to your funds:

  • EnergyFather has no access to transfers. The service does not request and technically does not have the permissions to send (Transfer) your TRX or any other tokens. It is impossible to withdraw coins to a third-party wallet.
  • EnergyFather has access exclusively to the resources being sold. The platform receives access only to resource-related operations, namely: transferring and reclaiming energy/bandwidth (Delegate/Reclaim), staking, and collecting staking rewards.
  • Keys never leave your device. The private key and seed phrase are never transmitted to the service. All confirmations take place exclusively through the official TronLink wallet. The service is granted only the necessary permissions on the TRON blockchain, not access to the wallet itself.
  • Absolute control remains in your hands. Your TRX always stays at your address, and the technical permissions granted can be revoked at any time with a single click through TronScan.

Preparing a separate browser with the TronLink wallet

For setup, you will need the TronLink wallet as a browser extension for a browser based on the Chromium engine (Google Chrome is also built on this engine).

Important security rule: use a separate "clean" browser for this task. During setup, you will only need to open three internet resources: the Chrome extension store, the TronScan blockchain explorer, and the EnergyFather panel. After setup is complete, it is strongly recommended that you do not visit any third-party websites in this browser - it should serve exclusively as an isolated environment for the TronLink wallet.

Create a separate browser. The best option is to use a portable version (it does not require installation on the system: download it, unpack it, and launch it immediately). For example, you can use CentBrowser Portable, which can be downloaded here:

https://www.centbrowser.com/

Install the TronLink wallet extension. Launch the downloaded browser and install the official TronLink extension from the Chrome browser extension store using this link:

https://chromewebstore.google.com/detail/tronlink/ibnejdfjmmkpcnlpebklmnkoeoihofec

Prepare the TRON address. In the installed TronLink wallet, create a new wallet or import the private key of an existing TRON address where you will stake TRX to obtain energy.

The software and address preparation for staking is complete. Proceed to staking and granting permissions.

Amount of TRX to stake and recommendation for the staking address

Minimum threshold: approximately 8,000 TRX. This amount is required to generate 65,000 units of energy - the minimum amount typically purchased by users of the TRON network.

Maximum amount: unlimited. Staking can be scaled at any time - you can start with the basic amount, evaluate profitability, and gradually stake additional TRX to increase your profit.

Dedicated address: we strongly recommend using a separate "clean" TRON address exclusively for staking and selling resources. Do not store third-party tokens on it or perform transfers or DeFi operations. This is a recommendation, not a strict requirement, but it will prevent confusion in your transaction history and simplify future operations.

Staking 5% of TRX for bandwidth to reduce costs

Bandwidth is consumed for all transactions on the TRON network: transferring and reclaiming energy, collecting rewards, voting, and so on. To prevent the network from charging TRX as fees for these actions, stake 5% of your total deposit for bandwidth - for example, 500 TRX out of 10,000 TRX.

In the browser with the TronLink wallet, open the resources section on TronScan using this link:

https://tronscan.org/#/wallet/resources

Click "Connect wallet" in the upper-right corner and confirm the connection in the TronLink wallet window.

Then, on the page, click "Get Bandwidth", make sure that the "Bandwidth + TRON Power" mode is selected (screenshot how-to-setup-selling-1), enter 5% of the TRX you plan to stake, and click "Confirm."

Make sure that the bandwidth has been credited - its amount will appear in the "From staking" row in the "My Bandwidth" section.

Adding your TRON address for energy sales to the system

To add an address for selling energy, open the "Seller / Setup selling" page:

https://panel.energyfather.com/f/seller/addresses

In the "Add new address" form (see screenshot how-to-setup-selling-2), fill in the fields:

  • "Name" - enter any name that is clear to you, such as "StakeTRX", "First", "Stake address", "Stake", "Main", "My", and so on.
  • "Address for sale of energy" - enter your TRON address where the TRX is staked.

Click "Add."

The address will appear in the EnergyFather panel, and a personal technical address of the service (Managing address) will be assigned to it. In the next step, you will need to grant this address the permissions required for automated energy sales.

Granting the EnergyFather service permissions to sell energy

Granting permissions is necessary so that the platform can generate profit for you in fully automated mode: selling energy to buyers, reclaiming released energy capacity, collecting network rewards, and reinvesting them. The service cannot operate without these permissions. At the same time, your assets remain fully secure: the permissions are granted strictly for specific types of operations and do not give the service access to transfer or withdraw your TRX.

In the isolated browser with TronLink installed, open the "Seller / Setup selling" page:

https://panel.energyfather.com/f/seller/addresses

In the table of addresses, click the "Grant" button next to the required address (screenshot how-to-setup-selling-3). Confirm the transaction in the TronLink window that opens.

By doing this, you approve the following list of permissions for the managing address:

  • Delegate resources - transferring resources (energy and bandwidth) to buyers;
  • Reclaim resources - returning resources to your address after the rental period expires;
  • TRX stake 2.0 - staking TRX for energy;
  • TRX unstake 2.0 - unstaking TRX when necessary;
  • Claim voter / SR rewards - collecting staking rewards from the blockchain;
  • Vote - automatic voting for super representatives (validator nodes of the network).

This is completely safe because all granted permissions are narrowly specialized and do not allow the platform to transfer your TRX or other assets from the address.

After confirming the transaction, click the "Verify" button so that the system can check and confirm the changes on the blockchain. The verification will be completed within a few seconds. The "Status" column will display "ON", and the "Permissions" column will show "Verified." This confirms that the permissions have been successfully granted and that EnergyFather will be able to generate profit for you automatically.

Please note: work with the wallet has been completed. You can close the isolated browser with TronLink - the remaining automation settings do not require the use of the wallet, so it will be more convenient to configure them directly from your regular browser.

Configuring automatic TRX staking

Auto-staking is necessary so that TRX received at the address - payments from energy sales and daily network rewards - is immediately directed to staking to generate new energy. This is a key element of reinvestment that activates compound interest for continuous profit growth.

To configure it, go to the "Free automatic tools / Freeze TRX (Staking)" section at:

https://panel.energyfather.com/f/tools/staking

On this page, specify the following values:

  • Status: Enabled - enabled
  • Resource: Energy - obtain energy
  • Balance threshold to perform staking: 70 TRX - the balance threshold at which staking is initiated
  • Amount of TRX to be left on the balance: 20 TRX - the minimum reserve of free TRX to remain at the address
  • Bandwidth for staking transaction: Use only the bandwidth available on the address (recommended) - which bandwidth to use for the staking operation
  • Do not stake if address has bandwidth below this value: 300 - perform staking only when the address has more than this amount of bandwidth available

After the settings are saved, EnergyFather will automatically stake the TRX received at the address, increasing your pool of energy available for sale and your total profit without any action on your part.

Configuring automatic collection of staking reward

On the TRON blockchain, staking rewards are credited by the blockchain to a special system balance. These TRX coins - including sending them to repeat energy staking - can only be used after they are withdrawn (Claim) directly to the address. Automatic collection retrieves the accumulated TRX once every 24 hours; more frequent collection is not possible due to the network's system limit. This ensures a regular inflow of funds for compound interest.

To configure it, go to the "Free automatic tools / Claiming reward" section at:

https://panel.energyfather.com/f/tools/claimingreward

Specify the following parameters:

  • Status: Enabled - enabled
  • Balance threshold to perform claiming reward: 20 TRX - the minimum amount of accumulated rewards required to initiate collection
  • Bandwidth for claiming reward transaction: Use only the bandwidth available on the address (recommended) - which bandwidth to use for the reward collection operation
  • Do not claim reward if address has bandwidth below this value: 300 - collect rewards only when the address has more than this amount of bandwidth available

After the settings are saved, the EnergyFather service will transfer the TRX credited by the blockchain to your working balance once a day. From there, auto-staking - if enabled and configured - will immediately send the funds to staking to obtain resources.

Configuring automatic voting

When staking TRX, the "TRON Power" resource, or votes, is credited in addition to energy or bandwidth. By themselves, these votes generate nothing; blockchain rewards are produced only by votes cast for active validators, known as super representatives of the network. Automatic voting distributes your TRON Power among nodes with the highest current profitability and promptly redirects it when the leaders change. This is an important part of the overall reinvestment mechanism that keeps compound interest working continuously.

To configure it, go to the "Free automatic tools / Voting" section at:

https://panel.energyfather.com/f/tools/voting

Specify the following parameters:

  • Status: Enabled - enabled
  • Tron power threshold to perform voting: 50 votes - the minimum number of undistributed votes required to initiate vote allocation
  • Max nodes to vote to: 2 - the maximum number of nodes among which to distribute the votes
  • Min node productivity: 99.9 - the minimum node productivity, in %
  • Bandwidth for voting transaction: Use only the bandwidth available on the address (recommended) - which bandwidth to use for the voting operation
  • Do not vote if address has bandwidth below this value: 300 - initiate voting only when the address has more than this amount of bandwidth available

After voting is configured, the EnergyFather service will distribute newly available votes among the most profitable nodes and transfer them if other nodes become more profitable.

Configuring automatic profit withdrawal

Automatic profit withdrawal completes the reinvestment cycle: TRX earned from energy sales is automatically sent to your working address, where the previously configured auto-staking immediately takes over. This prevents funds from remaining idle and makes every payout generate new profit instantly.

To configure it, go to the financial section at:

https://panel.energyfather.com/f/seller/balance

In the Automatic withdrawal settings block, specify the following parameters:

  • Status: Enabled - enabled
  • To TRON address - enter your working address, from which energy is sold (the funds would return to the staking address for further use)
  • Balance threshold to send payment: 200 TRX - the minimum amount required for an automatic payout

After the settings are saved, the EnergyFather service will automatically transfer the TRX earned to your wallet each time the balance reaches or exceeds the specified threshold. Regular withdrawals make it possible to continuously reinvest profits into new staking, maximizing the overall return through compound interest.

Support and feedback

If you encounter difficulties while configuring the settings or have questions about how the service works, contact support on the contact page:

https://energyfather.com/support